Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ivan.zan.barbaric

Pages: [1] 2 3 4
1
Mission planning / Re: DJI Mini SE and 3DSurvey Pilot
« on: September 02, 2022, 09:04:23 AM »
No problem, I am happy I could help.

2
Mission planning / Re: DJI Mini SE and 3DSurvey Pilot
« on: September 01, 2022, 10:19:43 AM »
Hi,
We have not yet tested DJI Mini SE, but the app does support similar drones like mini 1 and mini 2 in the new "Free Flight" mission, which takes the images automatically while you drive the drone manually. Images are taken according to the trigger distance you set at the beginning, creating enough overlap to achieve more than sufficient precision.

To answer your second question, the new version now contains the camera settings within the 3Dsurvey pilot app making the general workflow way simpler.
The app also contains a couple of new convenient missions, which however do cost around 5€ a month.

3
General Discussion / Re: Does 3Dsurvey support DJI Mavic Mini 2?
« on: August 08, 2022, 02:43:40 PM »
You have to fly the drone manually, and the app takes the pictures.

4
General Discussion / Re: Поддерживает ли 3Dsurvey Pilot
« on: August 08, 2022, 02:40:43 PM »
No sorry, 3Dsurvey app only supports Phantom 4 and Mavic Pro drones.

5
Hi Lajos,
As for now 3D survey does support Autel Robotics EVO II PRO 6k, but 3Dsurvey Pilot app does not support it. So you have to take the photos with the Autel app or manually.

6
General Discussion / Re: Does 3Dsurvey support DJI Air 2s?
« on: July 12, 2022, 09:49:50 AM »
No, it does not, as the DJI has not released the complete SDK yet.

7
General Discussion / Re: Why 3d Survey closes itself unexpectedly?
« on: July 11, 2022, 07:50:52 PM »
Hi, sorry for the late reply.
The only thing that comes to mind is that you do not have enough RAM, but I can't be sure. If you want, you can send us your project data to this link: https://3dsurvey.wetransfer.com/ and we can try to repeat the mistake and analyse it.

8
General Discussion / Re: Does 3Dsurvey support DJI Mavic Mini 2?
« on: July 01, 2022, 01:04:29 PM »
It does, but for now only in free flight mode, which costs 4.89€ monthly.

9
General Discussion / Re: Adding custom prj file
« on: July 01, 2022, 10:38:51 AM »
For now, only EPSG coordinate systems are supported, but it will be possible in near future (around October 2022).

10
General Discussion / Re: decrease procces time
« on: June 21, 2022, 09:04:55 AM »
Well, 3Dsurvey is a survey tool, so the software focuses on accuracy rather than process speed, as it is immensely important. You can speed up the process by setting fewer tie points, but the result will be less accurate. :)

11
General Discussion / Re: No camera image while flying Corridor
« on: June 09, 2022, 10:43:33 AM »
Are you using apple or android version?

12
To get the Beta version, simply find 3Dsurvey on the Google Play store, and click on "Join" here:

13
Mission planning / Re: Don't get green checkbox on "upload flight".
« on: May 12, 2022, 11:18:18 AM »
Hi,
It is because the Mavic Air2 drone is missing the waypoint navigation mode so autonomous flight is unsupported in pilot. You can only fly it manually and let 3Dsurvey take care of recording photos.

14
Unfortunately, 3Dsurvey does not support calculating pointclouds with Radeon GPUs.
In case you only have AMD GPU, it still is possible to calculate your pointcloud, but you have to calculate it without having GPU support, which consequently gives you a bit lower quality pointclouds.

15
General Discussion / Re: How to get resutls in GK (Gauß-Krüger)?
« on: May 05, 2022, 01:35:40 PM »
Hi,
Here is a short workflow for you:
(I copied the steps from the workflow for Belgium, so instead of Belgium coordinate system use your GK instead)

Workflow for setting up the project:
1.) Load in the images and set up the project like this:

2.) Run Exif_Extractor.exe and click on Load RTK from Photos, and then save the TXT file with GK Positions. (No need to select the coordinate system in this step, as the software automatically converts WGS coordinates extracted from images to Gauss Krueger with given transformation parameters and grid shift):

4.) In 3Dsurvey click on Reimport in the telemetry view:
(To get the telemetry window, click on Data/Telemetry and click reimport)

5) Select "Other" as "data type", then click on "Browse" to load in the "Belge 72" coordinates from Convert and set everything up like this. After that click on "Reimport":

This will overwrite the XYZ values for telemetry and move the camera position accordingly. Then just process the project normally.





Pages: [1] 2 3 4