3Dsurvey
3Dsurvey => General Discussion => Topic started by: ivan.zan.barbaric on February 22, 2022, 03:24:50 PM
Title:
How many ground control points should I use for a standard project?
Post by:
ivan.zan.barbaric
on
February 22, 2022, 03:24:50 PM
.
Title:
Re: How many ground control points should I use for a standard project?
Post by:
ivan.zan.barbaric
on
February 22, 2022, 03:25:20 PM
If you are using Phantom Pro the spacing between neighboring points should be between 100m and 200m (300' and 600').